Finish Thompson Self-priming SP Series

• Big on power - short on energy consumption
• Deep-lift capabilities (up to 25 feet/7.6 meters)
• Lightning-fast priming(18 feet/5.5 meters in 90 seconds)
• Ease of operation
• No seal replacement and no leaks
• Corrosion-resistant materials handle the most difficult applications
• Close-coupled design
• Polypropylene or PVDF construction
• Neodymium magnets on every model
• Replaceable shaft and bushing
• ISO 1940 G2.5 balancing
• Mounts to NEMA and IEC motor frames
• Easy Set measurement-free outer drive
• Mounts to motor without disassembly
• Back pullout design
• CE certified
• SP retains fluid for re-priming when shut off without a check valve
• SP lifts up to 25 feet (7.6 meters)**
• SP primes up to 18 feet (5.5 meters) in 90 seconds***
• Applications: Sumps, Underground storage tanks, Rail cars and tanker trucks, Over-the-wall applications, double containment tanks, Piping systems that tend to have trapped or entrained air
• Up to 70% operating efficiency
• High working pressure up to 90 psi
• Maximum viscosity: SP - over 50 cP
• Maximum temperature: Polypropylene - 180° F (82° C) PVDF - 220° F (104° C)

Contact us: 09175060226 (Viber)

                      09175940206 (Viber)

                      09171275336 (Viber)

Email us: maximumbuilders.ph@gmail.com

                 maximumengineering2011@gmail.com

                 albertgregore26@gmail.com